6975a
      },
      {
        "key": "VAR_NAME_Compress_Method_Monochrom",
        "description": "Compression",
        "valueType": "STRING",
        "defaultValue": "RetainExisting",
        "displayVariable": true,
        "regex": false,
        "options": [
          "RetainExisting",
          "CCITTG4",
          "JBIG2"
        ]
.
6972a
        "defaultValue": "BicDownsampling",
        "displayVariable": true,
        "regex": false,
        "options": [
          "AvgDownsampling",
          "BicDownsampling"
        ]
      },
      {
        "key": "VAR_NAME_Upsample_Resolution_Monochrom",
        "description": "Recalculate to",
        "valueType": "DOUBLE",
        "defaultValue": 600,
        "unit": "dpi",
        "min": 10,
        "max": 1000,
.
6970,6971c
        "key": "VAR_NAME_Compress_Method",
        "description": "Compression",
        "valueType": "STRING",
        "defaultValue": "RetainExisting",
        "displayVariable": true,
        "regex": false,
        "options": [
          "RetainExisting",
          "JPEG",
          "ZIP"
        ]
      },
      {
        "key": "VAR_NAME_Upsampling_Algorithm_Monochrom",
        "description": "Resample monochrome images",
.
6962,6963c
        "defaultValue": 300,
        "unit": "dpi",
        "min": 10,
.
6959,6960c
        "key": "VAR_NAME_Profile_RGB",
        "description": "Assign ICC Profile",
        "valueType": "STRING",
        "defaultValue": "sRGB IEC61966-2.1",
        "displayVariable": true,
        "regex": false,
        "options": [
          "sRGB IEC61966-2.1",
          "Adobe RGB (1998)",
          "eciRGB v2"
        ]
      }
    ]
  },
  {
    "id": 6,
    "automationKey": "UPSAMPLE_IMAGES",
    "name": "Upscale Image Resolution",
    "comment": "Upscale resolution for color, grayscale or monochrome images.",
    "description": "The resolution for color, grayscale, or monochrome images is upsampled to the specified target resolution. Use this correction to reduce the sawtooth effect at the sharp edges of objects.",
    "variables": [
      {
        "key": "VAR_NAME_Upsampling_Algorithm",
        "description": "Resample color/grayscale images",
        "valueType": "STRING",
        "defaultValue": "BicDownsampling",
        "displayVariable": true,
        "regex": false,
        "options": [
          "BicDownsampling",
          "AvgDownsampling"
        ]
      },
      {
        "key": "VAR_NAME_Upsample_Resolution",
        "description": "Recalculate to",
.
6954,6955c
          "All",
          "Images",
          "LnArt",
          "LnArtTxtSmthShds",
          "Txt"
.
6950c
        "unit": "mm",
        "displayVariable": true,
        "regex": false,
        "options": []
      }
    ]
  },
  {
    "id": 7,
    "automationKey": "TAG_DEVICE_RGB_WITH_ICC_PROFILE",
    "name": "Assign Source Profile for RGB objects",
    "comment": "Assign Source Profile for RGB objects",
    "description": "Assign an ICC Profile for RGB objects that do not have a source profile (DeviceRGB). This allows you to assign a source profile to an RGB object that differs from the working color space.",
    "variables": [
      {
        "key": "VAR_NAME_Objects",
        "description": "Apply to",
        "valueType": "STRING",
        "defaultValue": "All",
.
6947,6948c
        "key": "VAR_NAME_Value_Page",
        "description": "Number of Pages",
        "valueType": "INTEGER",
        "defaultValue": 3,
        "unit": "int",
        "min": 0,
        "max": 1000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Page_Length",
        "description": "Effective Page Height",
.
6939a
        "unit": "mm",
.
6937c
        "description": "Max. Page Height",
.
6925c
        "description": "Splitting based on",
.
6917c
        "description": "Split to Page Number",
.
6909c
        "description": "Split to Page Height",
.
6905c
    "description": "Splits a long Print Item into a multi-page document. The length of the individual page can be determined by entering the length or by entering the number of pages of equal length to be created.",
.
6903c
    "name": "Split a long Print Item into several pages",
.
6901c
    "id": 57,
.
6887c
        "description": "Apply to",
.
6883c
    "description": "White objects will be set to knockout. White objects should normally be set to knockout as they will otherwise disappear in the output. ",
.
6881c
    "name": "Set White Objects to Knockout",
.
6879c
    "id": 56,
.
6865c
        "description": "Scale Factor:",
.
6861c
    "description": "By setting the user unit e.g. 1:10, the effective size of the page is increased 10 times. The Set User Unit Fixup allows you to define pages larger than 200 x 200 inches.",
.
6859c
    "name": "Set Scale Factor",
.
6857c
    "id": 55,
.
6840,6852d
6831c
        "description": "Bleed",
.
6822c
        "description": "Select DieLine",
.
6818c
    "description": "Set TrimBox and the BleedBox with a defined distance to a selected \"DieLine\". The Print Item will be cropped to the BleedBox. Select the Spot Color name, which describes the DieLine, and enter the value for the Bleed and the unit.",
.
6816c
    "name": "Set TrimBox to the DieLine",
.
6814c
    "id": 78,
.
6801c
        "description": "Overprint State",
.
6794a
        "defaultValue": "Name 1|Name 2|Name3",
.
6793c
        "description": "Spot Color Name",
.
6789c
    "description": "Changes the overprint status for selected Spot Color(s) to the selected Status. Multiple spot color names can be found via RegEx. For example: \".*\" changes the status for all spot colors; \"Name 1|Name 2|Name 3\" changes the status for all listed spot colors; \"Name.*\" changes the status for all spot colors starting with \"Name\"; ... etc.)",
.
6787c
    "name": "Set Overprint State for Spot Colors",
.
6785c
    "id": 89,
.
6776c
        "description": "Spot Color names to be \"Unchanged\"",
.
6768c
        "description": "Spot Color names set to \"Knockout\"",
.
6760c
        "description": "Spot Color names set to \"Overprint\"",
.
6756c
    "description": "Sets the overprint-state of the included Spot Colors to \"Overprint\" or to \"Knockout\".",
.
6754c
    "name": "Change Overprint-State of a Spot Color",
.
6752c
    "id": 76,
.
6742a
        "unit": "mm",
.
6740c
        "description": "Bottom",
.
6731a
        "unit": "mm",
.
6729c
        "description": "Right",
.
6720a
        "unit": "mm",
.
6718c
        "description": "Top",
.
6709a
        "unit": "mm",
.
6707c
        "description": "Left",
.
6695c
        "description": "Height",
.
6683c
        "description": "Width",
.
6669,6681d
6658c
        "description": "Height",
.
6646c
        "description": "Width",
.
6634c
        "description": "Y-Offset",
.
6622c
        "description": "X-Offset",
.
6603c
        "description": "Starting point",
.
6599c
    "description": "Define the width and the height for Media- and TrimBox based on the selected starting point.\n        To move the TrimBox enter the values for the horizontal and vertical offset. The values for the Bleed can be set for all edges based on the TrimBox.  Select the Spot Color name, which describes the DieLine, and enter the value for the Bleed and the unit.",
.
6597c
    "name": "Set Page Geometry Boxes",
.
6595c
    "id": 77,
.
6580c
        "description": "Set to Page Box",
.
6566c
        "description": "Page Box to be moved",
.
6562c
    "description": "Synchronizes the dimension from the selected Source Page Geometry Box with the selected Target Page Geometry Box",
.
6560c
    "name": "Synchronize Selected Page Geometry Boxes",
.
6558c
    "id": 69,
.
6544c
        "description": "Apply to",
.
6540c
    "description": "Set the overprint state for selected objects (text, vectors or both) to \"Overprint\".",
.
6538c
    "name": "Set Black objects to Overprint",
.
6536c
    "id": 68,
.
6532c
    "description": "Sets the MediaBox to the origin 0/0. The visual appearance of the PDF will not change.",
.
6530c
    "name": "Set MediaBox to Origin",
.
6528c
    "id": 94,
.
6512c
        "description": "Scale Option",
.
6502a
        "unit": "mm",
.
6500c
        "description": "Unit",
.
6489c
        "description": "Short Edge",
.
6478c
        "description": "Long Edge",
.
6469a
        "unit": "percent",
.
6467c
        "description": "Short Edge",
.
6458a
        "unit": "percent",
.
6456c
        "description": "Long Edge",
.
6446a
        "unit": "percent",
.
6444c
        "description": "Scale Option",
.
6436c
        "description": "Scaling absolute",
.
6428c
        "description": "Scaling by percentage",
.
6424c
    "description": "Scales the page content of the trimmed area to a specific size. The existing Bleed is adjusted according to the scaling.",
.
6422c
    "name": "Scale Page Content",
.
6420c
    "id": 67,
.
6410a
        "unit": "percent",
.
6408c
        "description": "Scale to",
.
6404c
    "description": "Scales the page content to a given percentage. (Scale page edges proportionally)",
.
6402c
    "name": "Scale Page Content by Percent",
.
6400c
    "id": 93,
.
6369,6395d
6365a
        "unit": "mm",
.
6363c
        "description": "Short Edge",
.
6356a
        "unit": "mm",
.
6354c
        "description": "Long Edge",
.
6346,6352d
6338,6342c
          "FitFromInside",
          "FitFromInsideProp",
          "FitFromOutside",
          "FitFromOutsideProp",
          "StretchToFit"
.
6334c
        "defaultValue": "StretchToFit",
.
6331,6332c
    "id": 98,
    "automationKey": "SCALE_PAGE_CONTENT_ABSOLUTE",
    "name": "Scale Page Content Absolute",
    "comment": "Scale Page Content Absolute",
    "description": "Scales the page content of the trimmed area to a specific size. The existing Bleed is adjusted according to the scaling.",
    "variables": [
      {
        "key": "VAR_NAME_Fit_To",
        "description": "Scale Option",
.
6328a
      }
    ]
.
6323c
        "description": "Enlarge Page Geometry Box",
.
6308c
        "description": "of the",
.
6289c
        "description": "Relative to the",
.
6280a
        "unit": "mm",
.
6278c
        "description": "Y Offset",
.
6269a
        "unit": "mm",
.
6267c
        "description": "X Offset",
.
6255c
        "description": "Direction",
.
6246a
        "unit": "degrees",
.
6244c
        "description": "Rotation",
.
6240c
    "description": "Rotates the page content to a given degree. The page dimensions can remain unchanged or be adapted to the rotated Print Item.",
.
6238c
    "name": "Rotate Page Content",
.
6236c
    "id": 95,
.
6221c
        "description": "Rotate by ",
.
6217c
    "description": "Rotates pages 90° clockwise, 90° counterclockwise or 180°.",
.
6215c
    "name": "Rotate Page",
.
6213c
    "id": 64,
.
6199c
        "description": "Flip",
.
6184c
        "description": "Rotate",
.
6180c
    "description": "Rotates a page 90° clockwise, 90° counterclockwise or 180° and/or mirrors a page horizontally or vertically.",
.
6178c
    "name": "Rotate and/or Mirror Page",
.
6176c
    "id": 65,
.
6166a
        "unit": "mm",
.
6164c
        "description": "Bottom",
.
6155a
        "unit": "mm",
.
6153c
        "description": "Right",
.
6144a
        "unit": "mm",
.
6142c
        "description": "Top",
.
6133a
        "unit": "mm",
.
6131c
        "description": "Left",
.
6117,6129d
6109a
        "unit": "mm",
.
6107c
        "description": "Bottom",
.
6098a
        "unit": "mm",
.
6096c
        "description": "Right",
.
6087a
        "unit": "mm",
.
6085c
        "description": "Top",
.
6076a
        "unit": "mm",
.
6074c
        "description": "Left",
.
6070c
    "description": "Resizes existing TrimBox and BleedBox. “+” to enlarge, “-“ to reduce. Enter a global value in “Top” to effect all edges. Unlock lock icon to enter different values.\n    \tMediaBox and CropBox are placed on the BleedBox\n        Note: Enlarging TrimBox will not enlarge MediaBox ",
.
6068c
    "name": "Resize TrimBox and set Bleed",
.
6066c
    "id": 63,
.
6049,6061d
6043a
        "unit": "mm",
.
6041c
        "description": "Bottom",
.
6032a
        "unit": "mm",
.
6030c
        "description": "Right",
.
6021a
        "unit": "mm",
.
6019c
        "description": "Top",
.
6010a
        "unit": "mm",
.
6008c
        "description": "Left",
.
6004c
    "description": " Resizes existing TrimBox. “+” to enlarge, “-“ to reduce. Enter a global value in “Top” to effect all edges. Unlock lock icon to enter different values.",
.
6002c
    "name": "Resize TrimBox",
.
6000c
    "id": 62,
.
5990c
        "description": "Black",
.
5981c
        "description": "Yellow | b-Axis | Blue",
.
5972c
        "description": "Magenta | a-Axis | Green",
.
5963c
        "description": "Cyan | Lightness | Red",
.
5950c
        "description": "Color Space for alternate colors",
.
5942c
        "description": "New Spot Color name",
.
5929c
        "description": "Action",
.
5921c
        "description": "Spot Color to be changed",
.
5912c
        "description": "Black",
.
5903c
        "description": "Yellow | b-Axis | Blue",
.
5894c
        "description": "Magenta | a-Axis | Green",
.
5885c
        "description": "Cyan | Lightness | Red",
.
5872c
        "description": "Color Space for alternate colors",
.
5864c
        "description": "New Spot Color name",
.
5851c
        "description": "Action",
.
5843c
        "description": "Spot Color to be changed",
.
5834c
        "description": "Black",
.
5825c
        "description": "Yellow | b-Axis | Blue",
.
5816c
        "description": "Magenta | a-Axis | Green",
.
5807c
        "description": "Cyan | Lightness | Red",
.
5794c
        "description": "Color Space for alternate colors",
.
5786c
        "description": "New Spot Color name",
.
5773c
        "description": "Action",
.
5765c
        "description": "Spot Color to be changed",
.
5756c
        "description": "Black",
.
5747c
        "description": "Yellow | b-Axis | Blue",
.
5738c
        "description": "Magenta | a-Axis | Green",
.
5729c
        "description": "Cyan | Lightness | Red",
.
5716c
        "description": "Color Space for alternate colors",
.
5708c
        "description": "New Spot Color name",
.
5695c
        "description": "Action",
.
5687c
        "description": "Spot Color to be changed",
.
5678c
        "description": "Black",
.
5669c
        "description": "Yellow | b-Axis | Blue",
.
5660c
        "description": "Magenta | a-Axis | Green",
.
5651c
        "description": "Cyan | Lightness | Red",
.
5638c
        "description": "Color Space for alternate colors",
.
5630c
        "description": "New Spot Color name",
.
5617c
        "description": "Action",
.
5609c
        "description": "Spot Color to be changed",
.
5600c
        "description": "Black",
.
5591c
        "description": "Yellow | b-Axis | Blue",
.
5582c
        "description": "Magenta | a-Axis | Green",
.
5573c
        "description": "Cyan | Lightness | Red",
.
5560c
        "description": "Color Space for alternate colors",
.
5552c
        "description": "New Spot Color name",
.
5539c
        "description": "Action",
.
5531c
        "description": "Spot Color to be changed",
.
5522c
        "description": "Black",
.
5513c
        "description": "Yellow | b-Axis | Blue",
.
5504c
        "description": "Magenta | a-Axis | Green",
.
5495c
        "description": "Cyan | Lightness | Red",
.
5482c
        "description": "Color Space for alternate colors",
.
5474c
        "description": "New Spot Color name",
.
5461c
        "description": "Action",
.
5453c
        "description": "Spot Color to be changed",
.
5444c
        "description": "Black",
.
5435c
        "description": "Yellow | b-Axis | Blue",
.
5426c
        "description": "Magenta | a-Axis | Green",
.
5417c
        "description": "Cyan | Lightness | Red",
.
5404c
        "description": "Color Space for alternate colors",
.
5396c
        "description": "New Spot Color name",
.
5383c
        "description": "Action",
.
5375c
        "description": "Spot Color to be changed",
.
5371c
    "description": "Within this Fixup you are able to rename or remove selected Spot Colours. You can also convert all selected Spot Colors to CMYK using alternate color values. These alternate color values can be changed as well. To edit a Spot Color, select it on the left side of the dialog in the Spot Colors and Technical Colors section. These settings can be chosen in the main section of the dialog.",
.
5369c
    "name": "Rename, Convert or Remove Spot Colors",
.
5367c
    "id": 61,
.
5359c
        "defaultValue": "New Spot Color Name",
.
5357c
        "description": "New Spot Color Name",
.
5350a
        "defaultValue": "Current Spot Color Name",
.
5349c
        "description": "Current Spot Color Name",
.
5345c
    "description": "The Spot Color Name can be renamed by entering the current and new Spot Color Name.",
.
5343c
    "name": "Rename Spot Color",
.
5341c
    "id": 88,
.
5333a
        "defaultValue": "CMYK",
        "displayVariable": true,
        "regex": false,
        "options": [
          "CMYK",
          "Cyan",
          "Magenta",
          "Yellow",
          "Black"
        ]
      },
      {
        "key": "VAR_NAME_Do_Convert_RGB_to_CMYK",
        "description": "Convert RGB objects to CMYK",
        "valueType": "BOOLEAN",
        "defaultValue": true,
.
5331,5332c
        "key": "VAR_NAME_Separation_Name",
        "description": "Separation",
.
5325a
        "defaultValue": "CMYK",
.
5323,5324c
        "key": "VAR_NAME_Separation",
        "description": "Separation",
.
5316,5320c
    "id": 87,
    "automationKey": "REMOVE_SELECTED_SPOT_COLOR",
    "name": "Remove Spot Color",
    "comment": "Removes a single defined Spot Color",
    "description": "Removes selected Spot Colors including all objects.",
    "variables": [
      {
        "key": "VAR_NAME_SpotColorName",
        "description": "Spot Color ",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Add_SpotColor_TT",
        "description": "Add an additional Spot Color",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      }
    ]
  },
  {
    "id": 5,
    "automationKey": "REMOVE_SEPARATION",
    "name": "Delete Separation",
    "comment": "Deletes selected separations for objects of any type.",
    "description": "Deletes selected separations for objects of any type that are created in CMYK. Use this correction to remove parts or the entire artwork of the Print Item to preserve only spot colors of the artwork. Use the Convert RGB objects to CMYK option to convert objects before removing the selected separations.",
.
5312c
    "description": "Removes print Marks (including print Marks which were created by Acrobat) and everything outside the BleedBox (if the BleedBox is missing we will use the TrimBox).",
.
5310c
    "name": "Remove Print Marks ",
.
5308c
    "id": 79,
.
5304c
    "description": "Remove Page Scale Factor (User Units).",
.
5302c
    "name": "Remove Scale Factor",
.
5300c
    "id": 59,
.
5296c
    "description": "Removes Trim-, Bleed-, Crop- and ArtBox from the PDF.",
.
5294c
    "name": "Remove Page Boxes ",
.
5292c
    "id": 60,
.
5278c
        "description": "Apply to",
.
5274c
    "description": "Set the overprint state for selected black objects (text, vectors or both) to knockout.",
.
5272c
    "name": "Set Black Objects to Knockout",
.
5270c
    "id": 54,
.
5266c
    "description": "Remove all Output Intent(s) that are present in the PDF document. Removing an Output Intent can be a necessary step for repurposing a PDF/X or PDF/A file. It is also sometimes desirable to remove Output Intents if the file size must be reduced.",
.
5264c
    "name": "Remove Output Intent",
.
5262c
    "id": 53,
.
5249c
        "description": "Page Geometry Box",
.
5245c
    "description": "Remove all page objects that are completely outside of the selected Page Geometry Box",
.
5243c
    "name": "Remove Objects outside Page Geometry Box",
.
5241c
    "id": 52,
.
5231c
        "description": "Ignore Registration Marks",
.
5217,5229d
5209a
        "unit": "mm",
.
5207c
        "description": "Safety Margin",
.
5199c
        "description": " to",
.
5195c
    "description": "Removes layers including all objects on these layers and crops all pages to the visible area including Crop Marks.",
.
5193c
    "name": "Remove Layers and crop to the visible area",
.
5191c
    "id": 58,
.
5182c
        "description": "Layername (RegEx)",
.
5178c
    "description": "Removes selected layers including all objects on these layers.",
.
5176c
    "name": "Remove Selected Layers",
.
5174c
    "id": 51,
.
5170c
    "description": "Removes all empty pages from the document.",
.
5168c
    "name": "Remove Empty Pages",
.
5166c
    "id": 50,
.
5162c
    "description": "Removes BX...EX entries in page descriptions.\n        BX...EX is sometimes used to bracket new page operators in order to establish a certain degree of backward compatibility with old PDF viewers. A PDF viewer may ignore page operators bracketed with BX...EX if it cannot support it.",
.
5160c
    "name": "Remove BX and EX Entries.",
.
5158c
    "id": 49,
.
5148c
        "description": "Reduces by 25%",
.
5139c
        "description": "Reduces by 20%",
.
5130c
        "description": "Reduces by 17%",
.
5121c
        "description": "Reduces by 13%",
.
5112c
        "description": "Reduces by 10%",
.
5103c
        "description": "Reduces by 8%",
.
5094c
        "description": "Reduces by 5%",
.
5085c
        "description": "Reduces by 3%",
.
5081c
    "description": "Reduces tone values in the midtones by the selected value.",
.
5079c
    "name": "Reduce Tone Values in Midtones",
.
5077c
    "id": 48,
.
5072a
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "Structural",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Typ",
        "valueType": "STRING",
        "defaultValue": "Cutting",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting"
        ]
.
5067c
        "description": "Layer Name",
.
5052c
        "description": "Line Shape",
.
5040c
        "description": "Overprint State",
.
5033a
        "unit": "pt",
.
5031c
        "description": "Line Width",
.
5022a
        "unit": "percent",
.
5020c
        "description": "Black",
.
5011a
        "unit": "percent",
.
5009c
        "description": "Yellow",
.
5000a
        "unit": "percent",
.
4989a
        "unit": "percent",
.
4978c
        "description": "Technical Color",
.
4964,4976d
4956c
        "description": "Reduce to Outer Border",
.
4944c
        "description": "Accuracy",
.
4935a
        "unit": "mm",
.
4933c
        "description": "Offset",
.
4925c
        "description": "New Dieline Options",
.
4916c
        "description": "Current Spot Color",
.
4908c
        "description": "Spot Color to Replace",
.
4904c
    "description": "Creates a Dieline by tracing Spot Color objects. On the one hand this Fixup can be used to offset an existing Dieline, and to derive a Dieline from Spot Color objects on the other. This converts a non-path Dieline to a Dieline as a path.",
.
4902c
    "name": "Derive a Dieline from Spot Color",
.
4900c
    "id": 8,
.
4860c
        "description": "Typ",
.
4843c
        "description": "Group",
.
4829,4841d
4821a
        "unit": "mm",
.
4819c
        "description": "Corner Radius",
.
4810c
        "description": "Layer Name",
.
4795c
        "description": "Line Shape",
.
4782,4783c
        "key": "VAR_NAME_Overprint_stroke",
        "description": "Overprint State",
.
4774c
        "description": "Spot Color Name",
.
4765a
        "unit": "percent",
.
4763c
        "description": "Black",
.
4754a
        "unit": "percent",
.
4752c
        "description": "Yellow",
.
4743a
        "unit": "percent",
.
4732a
        "unit": "percent",
.
4721a
        "unit": "pt",
.
4719c
        "description": "Line Width",
.
4710a
        "unit": "mm",
.
4708c
        "description": "Offset",
.
4700c
        "description": "New Dieline Options",
.
4691c
        "description": "Existing Dieline",
.
4683c
        "description": "Dieline to replace",
.
4679c
    "description": "Deletes the existing Dieline and adds a new Dieline based on the position of the original Dieline.",
.
4677c
    "name": "Redraw Dieline of the TrimBox",
.
4675c
    "id": 9,
.
4665c
        "description": "Include intermediate color values",
.
4656a
        "unit": "percent",
.
4654c
        "description": "Black",
.
4645a
        "unit": "percent",
.
4643c
        "description": "Yellow",
.
4634a
        "unit": "percent",
.
4623a
        "unit": "percent",
.
4613c
        "description": "Target Color",
.
4604a
        "unit": "percent",
.
4602c
        "description": "Black",
.
4593a
        "unit": "percent",
.
4591c
        "description": "Yellow",
.
4582a
        "unit": "percent",
.
4571a
        "unit": "percent",
.
4561c
        "description": "Source Color",
.
4553c
        "description": "Apply to",
.
4544c
        "description": "Text and Vectors",
.
4535c
        "description": "Vector",
.
4522c
    "description": "Changes the color value of CMYK objects depending on the selected object type.",
.
4520c
    "name": "Redye CMYK-Objects",
.
4518c
    "id": 47,
.
4508c
        "description": "Top Edge",
.
4499c
        "description": "Left Edge",
.
4491c
        "description": "Page Edge",
.
4487c
    "description": "Mirrors the print item on a specific edge based on the TrimBox. The length of the selected edge will be doubled.",
.
4485c
    "name": "Mirror the Print Item on a Specific Edge",
.
4483c
    "id": 75,
.
4479c
    "description": "Mirrors the print item on the short edge. The length of the long edge will be doubled.",
.
4477c
    "name": "Mirror the Print Item on the Short Edge",
.
4475c
    "id": 74,
.
4471c
    "description": "Mirrors the print item on the long edge. The length of the short edge will be doubled.",
.
4469c
    "name": "Mirror the Print Item on the Long Edge",
.
4467c
    "id": 73,
.
4453c
        "description": "Overprint State",
.
4444a
        "unit": "percent",
.
4442,4443c
        "description": "Tint Value",
        "valueType": "INTEGER",
.
4435c
        "defaultValue": "Spot Color",
.
4433c
        "description": "Spot Color Name",
.
4424a
        "unit": "percent",
.
4422,4423c
        "description": "Black",
        "valueType": "INTEGER",
.
4413a
        "unit": "percent",
.
4411,4412c
        "description": "Yellow",
        "valueType": "INTEGER",
.
4402a
        "unit": "percent",
.
4401c
        "valueType": "INTEGER",
.
4391a
        "unit": "percent",
.
4390c
        "valueType": "INTEGER",
.
4385c
    "description": "Maps specific CMYK values from vector objects to a Spot Color name. The overprint state can be defined by the operator.",
.
4383c
    "name": "Map CMYK Values from Vector Objects to a Spot Color",
.
4381c
    "id": 45,
.
4371c
        "description": "Spot Color Name",
.
4362a
        "unit": "percent",
.
4360c
        "description": "Black",
.
4351a
        "unit": "percent",
.
4349c
        "description": "Yellow",
.
4340a
        "unit": "percent",
.
4329a
        "unit": "percent",
.
4323c
    "description": "Maps specific CMYK values including all tint values to a Spot Color name. Be carefull: All CMYK values for all objects (including Text, Vectors and Images) will be mapped!",
.
4321c
    "name": "Map CMYK Values to a Spot Color",
.
4319c
    "id": 44,
.
4310c
        "description": " to",
.
4306c
    "description": "Select any layer listed to make the layer visible.",
.
4304c
    "name": "Make Selected Layers Visible",
.
4302c
    "id": 41,
.
4298c
    "description": "Changes the state of visibility for all layers to visible.",
.
4296c
    "name": "Make all Layers Visible",
.
4294c
    "id": 40,
.
4284a
        "unit": "pt",
.
4282c
        "description": "by",
.
4273a
        "unit": "pt",
.
4271c
        "description": "Set Line Width to",
.
4262a
        "unit": "pt",
.
4260c
        "description": "for Line Width less than",
.
4251c
        "description": "Increase white Vectors",
.
4242c
        "description": "Increase white Text",
.
4233c
        "description": "Increase white Lines",
.
4229c
    "description": "Increases selected White Elements such as Lines (Strokes), Vectors and/or Text.",
.
4227c
    "name": "Increase White Elements",
.
4225c
    "id": 12,
.
4215c
        "description": "Increases by 25%",
.
4206c
        "description": "Increases by 20%",
.
4197c
        "description": "Increases by 17%",
.
4188c
        "description": "Increases by 15%",
.
4179c
        "description": "Increases by 13%",
.
4170c
        "description": "Increases by 10%",
.
4161c
        "description": "Increases by 8%",
.
4152c
        "description": "Increases by 5%",
.
4143c
        "description": "Increases by 3%",
.
4139c
    "description": "Increases tone values in the midtones by the selected value.",
.
4137c
    "name": "Increase Tone Values in Midtones",
.
4135c
    "id": 43,
.
4126d
4122c
    "description": "Changes the state of inserted layernames to \"off\".",
.
4120c
    "name": "Hide Selected Layers",
.
4118c
    "id": 42,
.
4108c
        "description": "Flips the page vertically",
.
4099c
        "description": "Flips the page horizontally",
.
4095c
    "description": "Flips the page either horizontally or vertically.",
.
4093c
    "name": "Flip Page",
.
4091c
    "id": 66,
.
4081a
        "unit": "dpi",
.
4079c
        "description": "Gradient and Mesh Resolution",
.
4070a
        "unit": "dpi",
.
4068c
        "description": "Lineart and Text Resolution",
.
4056c
        "description": "Pixel/Vector balance",
.
4052c
    "description": "Flattens all transparent objects, as well as objects affected by transparent objects, using the values from the Transparency Flattener preset.",
.
4050c
    "name": "Flatten Transparency",
.
4048c
    "id": 39,
.
4044c
    "description": "All objects on layers that are currently invisible are discarded and all layers (which are visible) are flattened (removed from the document)",
.
4042c
    "name": "Flatten Layers",
.
4040c
    "id": 38,
.
4035a
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
.
4030c
        "description": "Layer Name",
.
4024c
        "displayVariable": false,
.
4021a
        "unit": "mm",
        "min": -100,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Spotcolorname_white",
        "description": "Fill Color",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Spotcolor_tint",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Spotcolor_opacity",
        "description": "Opacity",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
.
4018,4019c
    "id": 36,
    "automationKey": "FILL_SHAPE_WITH_SPOT_WHITE",
    "name": "Fill a Shape with Spot Color",
    "comment": "Fuellt die Flaeche eines Bereiches mit der Sonderfarbe \"white\"",
    "description": "Creates a separation using the selected Spot Color for the content of a shape.",
    "variables": [
      {
        "key": "VAR_NAME_Find_spotcolorname",
        "description": "Spot Color for Shape",
        "valueType": "STRING",
        "defaultValue": "Dieline",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Adjust_size",
        "description": "Adjust Size",
.
4012,4014c
          "ImageBox",
          "ImageBox + Bleed"
        ]
      },
      {
        "key": "VAR_NAME_Adjust_size",
        "description": "Offset",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": -100,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "String",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
      }
.
4008c
        "defaultValue": "ImageBox",
.
4005,4006c
        "key": "VAR_NAME_Spotcolor_Tint",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Box",
        "description": "PageBox",
.
3996,3997c
        "key": "VAR_NAME_Spotcolorname",
        "description": "Fill Color",
.
3993c
    "description": "Creates a separation using the selected Spot Color for the selected PageBox: ImageBox or ImageBox + Bleed.",
.
3991c
    "name": "Fill PageBox with Spot Color",
.
3989c
    "id": 37,
.
3981a
        "defaultValue": "Dieline",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Offset",
        "description": "Offset",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": -1000,
        "max": 0,
.
3980c
        "description": "Technical Color",
.
3976c
    "description": "Removes printing objects for selected areas – e.g glueing areas. The area is determined by the selection of a technical Spot Color.",
.
3974c
    "name": "Remove Printing Objects in Defined Area",
.
3972c
    "id": 34,
.
3956c
        "description": "Add white background to",
.
3952c
    "description": "Adds a non-printing white background to the selected Page Geometry Box. Attention: White as a Spot Color will not be added! This only adds a white background which is visible when viewed in Adobe Acrobat for example.",
.
3950c
    "name": "Add Background",
.
3948c
    "id": 33,
.
3938a
        "unit": "percent",
.
3936c
        "description": "Tint Value",
.
3927c
        "description": "Spot Color Name",
.
3918c
        "description": "Define as a Spot Color",
.
3909a
        "unit": "percent",
.
3907c
        "description": "Black",
.
3898a
        "unit": "percent",
.
3896c
        "description": "Yellow",
.
3887a
        "unit": "percent",
.
3876a
        "unit": "percent",
.
3870c
    "description": "Dyes the background using either CMYK or Spot Color values.",
.
3868c
    "name": "Dye Background",
.
3866c
    "id": 35,
.
3856c
        "description": "Extract all Colors from DeviceN",
.
3847c
        "description": "Extract CMYK-Colors from DeviceN",
.
3838c
        "description": "Extract Spot Colors from DeviceN",
.
3834c
    "description": "Converts objects created as DeviceN to the corresponding Separation Color Space by removing the DeviceN components and recreating the components in the Separation Color Space. Use this Fixup to extract DieLines in the PDF file from DeviceN constructs to make them editable.",
.
3832c
    "name": "Extract Colors from DeviceN",
.
3830c
    "id": 32,
.
3826c
    "description": "Searches the local Server font folder for missing fonts and attempts to embed them.",
.
3824c
    "name": "Embed missing Fonts",
.
3822c
    "id": 31,
.
3807c
        "description": "Compression",
.
3798a
        "unit": "dpi",
.
3796c
        "description": "For Images above",
.
3787a
        "unit": "dpi",
.
3785c
        "description": "Recalculate to",
.
3772c
        "description": "Downsample monochrome images",
.
3759c
        "description": "Compression",
.
3750a
        "unit": "dpi",
.
3748c
        "description": "For Images above",
.
3739a
        "unit": "dpi",
.
3737c
        "description": "Recalculate to",
.
3725c
        "description": "Downsample color/grayscale images",
.
3721c
    "description": "Downsamples, compresses or recompresses color, grayscale or monochrome images.",
.
3719c
    "name": "Downsample and/or Compress Images",
.
3717c
    "id": 72,
.
3700,3712d
3694a
        "unit": "mm",
.
3692c
        "description": "Bottom",
.
3683a
        "unit": "mm",
.
3681c
        "description": "Right",
.
3672a
        "unit": "mm",
.
3670c
        "description": "Top",
.
3661a
        "unit": "mm",
.
3659c
        "description": "Left",
.
3655c
    "description": "Inserts TrimBox based on existing Crop Marks and set defined Bleed.",
.
3653c
    "name": "Derive Page Geometry Boxes from Crop Marks",
.
3651c
    "id": 70,
.
3634,3646d
3628a
        "unit": "mm",
.
3626c
        "description": "Bottom",
.
3617a
        "unit": "mm",
.
3615c
        "description": "Right",
.
3606a
        "unit": "mm",
.
3604c
        "description": "Top",
.
3595a
        "unit": "mm",
.
3593c
        "description": "Left",
.
3584a
        "unit": "percent",
.
3582c
        "description": "Black",
.
3573a
        "unit": "percent",
.
3571c
        "description": "Yellow",
.
3562a
        "unit": "percent",
.
3551a
        "unit": "percent",
.
3535c
        "description": "Page Box",
.
3531c
    "description": "Sets the selected PageBox to the surrounding area of vector objects which uses entered CMYK values.",
.
3529c
    "name": "Derive a PageBox from Colored Objects",
.
3527c
    "id": 71,
.
3496,3519d
3493,3494c
        "key": "VAR_NAME_Slug_TXT",
        "description": "Safety Zone",
.
3485a
        "unit": "mm",
.
3483c
        "description": "Bottom",
.
3474a
        "unit": "mm",
.
3472c
        "description": "Top",
.
3463a
        "unit": "mm",
.
3461c
        "description": "Right",
.
3452a
        "unit": "mm",
.
3450c
        "description": "Left",
.
3441c
        "description": "Spot Color",
.
3437c
    "description": "Creates a multi-page PDF of individual Print Items found on the page. For this purpose, the individual Print Items on the page must be bordered by a Dieline created as a spot colour.",
.
3435c
    "name": "Extract Print Items from Page",
.
3433c
    "id": 97,
.
3428c
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
.
3422,3425c
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "White",
.
3416,3418c
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
.
3412c
        "defaultValue": "White",
.
3409,3410c
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
.
3403c
        "defaultValue": "White",
.
3393,3401c
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
.
3389,3390d
3382,3385c
        "key": "VAR_NAME_Backside",
        "description": "Back Side",
        "valueType": "STRING",
.
3373,3376c
        "key": "VAR_NAME_Underlaying_Image",
        "description": "Underlaying Image",
        "valueType": "STRING",
.
3364,3367c
        "key": "VAR_NAME_Opacity_init",
        "description": "Coverage",
        "valueType": "INTEGER",
        "defaultValue": 25,
        "unit": "percent",
        "min": 0,
        "max": 100,
.
3361c
        "options": [
          "None",
          "Horizontally",
          "Vertically"
        ]
.
3355,3358c
        "key": "VAR_NAME_Flip_Page_Init",
        "description": "Flip",
        "valueType": "STRING",
        "defaultValue": "None",
.
3352c
        "options": [
          "0",
          "180"
        ]
.
3346,3349c
        "key": "VAR_NAME_Rotate_Page_Init",
        "description": "Rotate",
        "valueType": "STRING",
        "defaultValue": "0",
.
3342c
        "regex": false,
.
3338,3340c
        "key": "VAR_NAME_Offset",
        "description": "Offset",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": -1000,
        "max": 1000,
.
3328,3335c
        "options": []
.
3322,3326c
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
.
3314,3317c
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
.
3311,3312c
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
.
3304,3308c
        "options": []
.
3298,3302c
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
.
3293c
        "displayVariable": false,
.
3280,3290c
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
.
3276,3277d
3271c
        "min": 0,
.
3269c
        "defaultValue": 100,
.
3266,3267c
        "key": "VAR_NAME_Spotcolorname",
        "description": "Spot Color",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Tintvalue",
        "description": "Tint Value",
.
3260,3262c
          "ImageBox",
          "ImageBox + Bleed"
.
3256c
        "defaultValue": "ImageBox",
.
3253,3254c
        "key": "VAR_NAME_Box",
        "description": "Pagebox",
.
3241,3247c
        "key": "VAR_NAME_White_to_ImageBox",
        "description": "Add White channel",
        "valueType": "BOOLEAN",
        "defaultValue": true,
.
3234,3239c
        "key": "VAR_NAME_Add_White_to",
        "description": "Add White to",
        "valueType": "STRING",
        "defaultValue": "Backside",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Frontside",
          "Backside",
          "Both"
        ]
      },
.
3221,3230c
          "Single",
          "Double",
          "Custom"
.
3217c
        "defaultValue": "Double",
.
3214,3215c
        "key": "VAR_NAME_Mode",
        "description": "Mode",
.
3199,3211c
    "id": 2,
    "automationKey": "DAY_AND_NIGHT",
    "name": "Day and Night Output",
    "comment": "Prepares files for Day & Night output",
    "description": "Prepares the Print Item for Day-and-Night-Output, by adding White Channel as well as reducing optional the opacity of the image.",
.
3191c
        "defaultValue": false,
.
3188,3189c
        "key": "VAR_NAME_Stretch_Factor",
        "description": "Stretch factor",
        "valueType": "DOUBLE",
        "defaultValue": 1,
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Mirror_method_TT",
        "description": "Repeat last pixel: takes the last pixel on each edge and repeats the result to create the additional Bleed Mirror page objects: mirrors the edges 1 to 1 from each edge and expands them outwards to create addional Bleed Stretch border area as image: Stretches each edge of the Print Item, based on the Stretch Factor and the starting point. Activating this option will display additional features under the Advanced tab.",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Mirror_method",
        "description": "Method",
        "valueType": "STRING",
        "defaultValue": "ImgStretchCorners",
        "displayVariable": true,
        "regex": false,
        "options": [
          "LastPixelCorners",
          "PageContCorners",
          "ImgStretchCorners"
        ]
      },
      {
        "key": "VAR_NAME_Spot_Color_Regex",
        "description": "Is not used in the UI",
        "valueType": "String",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Behind_Content",
        "description": "Create Bleed behind existing page content",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "STRING",
        "defaultValue": "Bleed",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "Structural",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "Bleed",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
      }
    ]
  },
  {
    "id": 29,
    "automationKey": "CREATE_SLIMFRAME",
    "name": "Create Slimframe",
    "comment": "Adds a distortion and creates a dieline for slimframes",
    "description": "Performs unproportional scaling depending on the size and the substrate. Increases the TrimBox, adds a white area, writes text and creates a beveled outline around this TrimBox",
    "variables": [
      {
        "key": "VAR_NAME_Material",
        "description": "Substrate",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Dynajet",
          "Greyback",
          "Dekotex7047",
          "Dekotex7058"
        ]
      },
      {
        "key": "VAR_NAME_INIT_KEDER",
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Scaling_Factor",
        "description": "Scaling factor – 1 to X",
        "valueType": "DOUBLE",
        "unit": "percent",
        "min": 1,
        "max": 20,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Keder_Reduction_Per_Edge",
        "description": "Standard size reduction per side",
        "valueType": "DOUBLE",
        "min": 0,
        "max": 50,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Increase_MediaBox",
        "description": "White area around TrimBox",
        "valueType": "DOUBLE",
        "unit": "mm",
        "min": 0,
        "max": 50,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_MediaBox_LineWidth",
        "description": "Line width around MediaBox",
        "valueType": "DOUBLE",
        "unit": "pt",
        "min": 0,
        "max": 50,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_BEVEL_OFFSET_MM",
        "description": "Cutcontour bevel Offset",
        "valueType": "DOUBLE",
        "unit": "mm",
        "min": 0,
        "max": 50,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_BEVEL_LINEWIDT_PT",
        "description": "Cutcontour Line Width",
        "valueType": "DOUBLE",
        "unit": "pt",
        "min": 0,
        "max": 50,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_BEVEL_LINE_SPOT_NAME",
        "description": "Spot Color Name for the Cutcontour",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      }
    ]
  },
  {
    "id": 3,
    "automationKey": "CREATE_WHITE_ONLY_SEPARATION",
    "name": "Create White Only Separation",
    "comment": "Creates a spot color white separation for white pixels",
    "description": "Creates a spot color white separation from all white areas of the Print Item. This removes any other content, leaving only the white areas as printable areas.",
    "variables": [
      {
        "key": "VAR_NAME_Spotcolorname",
        "description": "Create as Spot Color",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Spotcolor_Tint",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Accuracy",
        "description": "Accuracy",
        "valueType": "STRING",
        "defaultValue": "1200",
        "displayVariable": true,
        "regex": false,
        "options": [
          "800",
          "1200",
          "2400"
        ]
      },
      {
        "key": "VAR_NAME_Do_Remove_Separation",
        "description": "Remove Separation",
        "valueType": "BOOLEAN",
        "defaultValue": true,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Separation",
        "description": "Separation",
        "valueType": "STRING",
        "defaultValue": "CMYK",
        "displayVariable": false,
        "regex": false,
        "options": [
          "CMYK",
          "Cyan",
          "Magenta",
          "Yellow",
          "Black"
        ]
      },
      {
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "White",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
      }
    ]
  },
  {
    "id": 30,
    "automationKey": "CROP_TO_VISIBLE",
    "name": "Crops to Visible Area",
    "comment": ">Beschneiden auf den sichtbaren Bereich",
    "description": "Crops all pages to the visible area. You can decide if CropMarks should be ignored and you can add a security margin.",
    "variables": [
      {
        "key": "VAR_NAME_Safty_margin",
        "description": "Safety Margin",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Ignore_registrationmarks",
        "description": "Ignore Registration Marks",
.
3180a
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_INTERMEDIATE_VALUES",
        "description": "Include intermediate color values",
        "valueType": "BOOLEAN",
        "defaultValue": true,
        "displayVariable": true,
        "regex": false,
        "options": []
      }
    ]
  },
  {
    "id": 92,
    "automationKey": "CONVERT_RGB_VECTOR_TO_CMYK",
    "name": "Convert RGB vector objects to CMYK working space",
    "comment": "Convert RGB Vector to CMYK",
    "description": "Convert RGB vector objects from RGB to CMYK using a Devicelink Profile for best office conversion. Note that Red (255/0/0) is converted to CMYK (0/100/100/0), Green (0/255/0) to CMYK (100/0/100/0), and Blue (0/0/255) to CMYK (100/100/0/0). Black (0/0/0) and White (255/255/255) are converted to CMYK (0/0/0/100) and (0/0/0/0). Same RGB values e.g.: 128/128/128 is converted to pure black in CMYK (0/0/0/0/50).",
    "variables": []
  },
  {
    "id": 26,
    "automationKey": "CONVERT_TO_GRAYSCALE",
    "name": "Convert to Grayscale",
    "comment": "Konvertiert Alles in Graustufen",
    "description": "Converts all colors (including Spot Colors) to Grayscale based on the selected object type.",
    "variables": [
      {
        "key": "VAR_NAME_Object_type",
        "description": "Object Type",
        "valueType": "STRING",
        "defaultValue": "All",
        "displayVariable": true,
        "regex": false,
        "options": [
          "All",
          "Images",
          "ImgsWLssyCmp",
          "ImgsWOLssyCmp",
          "LnArt",
          "LnArtTxtSmthShds",
          "SmthShds",
          "Txt"
        ]
      }
    ]
  },
  {
    "id": 27,
    "automationKey": "CREATE_BLEED_BY_SCALING",
    "name": "Create Bleed by Upscaling",
    "comment": "Creates a Bleed by upscaling inside a given tolerance",
    "description": "Bleed is created by upscaling the pages. As pages may be upscaled unproportionally a maximum distortion of 5% is specified. If the distortion is higher than specified, the fixup is not executed and no bleed is created.",
    "variables": [
      {
        "key": "VAR_NAME_Create_bleed_scale",
        "description": "Required Bleed",
        "valueType": "DOUBLE",
        "defaultValue": 1.5,
        "unit": "mm",
        "min": 0.01,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Maximal_distortion",
        "description": "Maximum Distortion",
        "valueType": "DOUBLE",
        "defaultValue": 5,
        "unit": "percent",
        "min": 0.01,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      }
    ]
  },
  {
    "id": 28,
    "automationKey": "CREATE_BLEED_MIRRORING",
    "name": "Create Bleed by Mirroring",
    "comment": "Creates a Bleed mirroring the page content.",
    "description": "Generates Bleed on the selected edges of the document by mirroring the existing image based on the pagebox selected.",
    "variables": [
      {
        "key": "VAR_NAME_Box",
        "description": "Create Bleed on",
        "valueType": "STRING",
        "defaultValue": "ImageBox",
        "displayVariable": true,
        "regex": false,
        "options": [
          "ImageBox",
          "ImageBox + Bleed"
        ]
      },
      {
        "key": "VAR_NAME_Bleed_Label",
        "description": "Bleed",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Left_Width",
        "description": "Left",
        "valueType": "DOUBLE",
        "defaultValue": 3,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Bottom_Width",
        "description": "Bottom",
        "valueType": "DOUBLE",
        "defaultValue": 3,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Right_Width",
        "description": "Right",
        "valueType": "DOUBLE",
        "defaultValue": 3,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Top_Width",
        "description": "Top",
        "valueType": "DOUBLE",
        "defaultValue": 3,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_BleedSource_Label",
        "description": "Start Point",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Source_Left",
        "description": "Left",
        "valueType": "DOUBLE",
        "defaultValue": 2,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Source_Bottom",
        "description": "Bottom",
        "valueType": "DOUBLE",
        "defaultValue": 2,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Source_Right",
        "description": "Right",
        "valueType": "DOUBLE",
        "defaultValue": 2,
        "unit": "mm",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Source_Top",
        "description": "Top",
        "valueType": "DOUBLE",
        "defaultValue": 2,
        "unit": "mm",
.
3178c
        "description": "Black",
.
3169a
        "unit": "percent",
.
3167c
        "description": "Yellow",
.
3158a
        "unit": "percent",
.
3147a
        "unit": "percent",
.
3130c
        "description": "Apply to",
.
3116c
        "description": "Color Space to convert",
.
3112c
    "description": "Searches for either a CMYK value of 0/0/0/100, an RGB Value of 0/0/0 or a Grayscale value of 100 and replaces it with the CMYK values entered. All intermediate color tones, i.e. all values from 0% to 100%, are also affected by this Fixup unless this option is deselected. Image, Vectors and Text Elements can be individually converted.",
.
3110c
    "name": "Convert Pure Black to Rich Black",
.
3108c
    "id": 24,
.
3103a
      },
      {
        "key": "VAR_NAME_INTERMEDIATE_VALUES",
        "description": "Include intermediate color values",
        "valueType": "BOOLEAN",
        "defaultValue": true,
        "displayVariable": true,
        "regex": false,
        "options": []
.
3098a
        "defaultValue": 100,
        "unit": "percent",
.
3097c
        "description": "Black",
.
3088a
        "defaultValue": 0,
        "unit": "percent",
.
3087c
        "description": "Yellow",
.
3078a
        "defaultValue": 50,
        "unit": "percent",
.
3068a
        "defaultValue": 50,
        "unit": "percent",
.
3065a
        "key": "VAR_NAME_Colorspace",
        "description": "Colorspace",
        "valueType": "STRING",
        "defaultValue": "CMYK",
        "displayVariable": true,
        "regex": false,
        "options": [
          "CMYK",
          "RGB",
          "Gray"
        ]
      }
    ]
  },
  {
    "id": 25,
    "automationKey": "CONVERT_PURE_BLACK_TEXT_TO_RICH_BLACK",
    "name": "Convert Black Text Objects to Rich Black",
    "comment": "Konvertiert reines Schwarz für Textobjekte in Tiefschwarz",
    "description": "Searches for a CMYK value of 0/0/0/100 and replaces it with the entered CMYK values. All intermediate color tones, i.e. all values from 0% to 100%, are also affected. Only text larger than 5pt will be converted.",
    "variables": [
      {
.
3057,3060c
        "key": "VAR_NAME_Objects",
        "description": "Exclude Object Type",
        "valueType": "STRING",
        "defaultValue": "All",
        "displayVariable": true,
        "regex": false,
        "options": [
          "All",
          "exclude Text",
          "exclude Spot",
          "exclude Spot and Text"
        ]
      },
      {
        "key": "VAR_NAME_Resolution",
        "description": "Resolution",
        "valueType": "DOUBLE",
        "defaultValue": 300,
        "unit": "dpi",
.
3050,3054c
    "id": 104,
    "automationKey": "CONVERT_PAGE_CONTENT_TO_AN_IMAGE",
    "name": "Convert Page Content to an Image",
    "comment": "Convert Page Content to an Image",
    "description": "Converts the entire page content to a pixel image for the selected color space. Selected elements - text, Spot Color or both - can be excluded from the conversion when applying the correction, for example to accept an unwanted color shift in the conversion of a Spot Color.",
.
3046c
    "description": "Converts Embedded Fonts to Outlines (Missing Glyphs Are Ignored).",
.
3044c
    "name": "Convert Fonts to Outlines",
.
3042c
    "id": 23,
.
3035,3036c
          "CMYK_Value",
          "Spotcolor_Value"
.
3031c
        "defaultValue": "CMYK_Value",
.
3029c
        "description": "Convert to",
.
3025c
    "description": "Converts the Registration Color either to 100% Black or to a Spot Color called \"Separation Black\". (Objects with the Spot Color \"Black\" are also converted to \"Separation Black\")",
.
3023c
    "name": "Convert Registration Color",
.
3021c
    "id": 22,
.
3017c
    "description": "Converts all Spot Colors to CMYK using alternate color values.",
.
3015c
    "name": "Convert Spot Colors to CMYK",
.
3013c
    "id": 21,
.
3003a
        "unit": "mm",
.
3001c
        "description": "Reduce by",
.
2992c
        "description": "Reduce to outer border",
.
2983c
        "description": "Spot Color",
.
2979c
    "description": "Reduces the printed area of a selected Spot Color (e.g. white) by the entered value.",
.
2977c
    "name": "Clip existing White Channel",
.
2975c
    "id": 20,
.
2965c
        "description": "Outside only",
.
2951,2963d
2943a
        "unit": "mm",
.
2941c
        "description": "Bleed",
.
2932c
        "description": "Spot Color name",
.
2920c
        "description": "Tracing Objects",
.
2916c
    "description": "Clips objects with the selected Spot Color including the defined Bleed. Select the Spot Color name, which describes the shape, and define the width of the Bleed you want to generate. If nested DieLines are used, you can decide to clip the print item to the outer border by selecting Tracing Objects \"From Vector Paths\" and the checkbox \"Outside only\".",
.
2914c
    "name": "Clip Print Item with Additional Bleed ",
.
2912c
    "id": 19,
.
2899c
        "description": "Accuracy",
.
2890a
        "unit": "percent",
.
2888c
        "description": "Tint Value",
.
2883c
        "regex": false,
.
2879c
        "description": "Spot Color",
.
2875c
    "description": "The existing Spot Color will be removed and replaced by a traced color area using the entered tint value.",
.
2873c
    "name": "Change Tint Value for Spot Color",
.
2871c
    "id": 96,
.
2857c
    "description": "Change Alternate Color Value from Spot Color",
.
2855c
    "name": "Change Alternate Color Value from Spot Color",
.
2853c
    "id": 101,
.
2847a
        "options": [
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_1.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_5.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_10.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Drillhole.pdf"
        ]
      },
      {
        "key": "VAR_NAME_Spotcolor",
        "description": "Spot Color Name",
        "valueType": "STRING",
        "defaultValue": "CutContour",
        "displayVariable": true,
        "regex": false,
.
2843c
        "description": "Grommet Template",
.
2834a
        "unit": "mm",
.
2832c
        "description": "Bottom",
.
2823a
        "unit": "mm",
.
2821c
        "description": "Top",
.
2812a
        "unit": "mm",
.
2810c
        "description": "Right",
.
2801a
        "unit": "mm",
.
2799c
        "description": "Left",
.
2790a
        "unit": "mm",
.
2788c
        "description": "Right",
.
2779a
        "unit": "mm",
.
2777c
        "description": "Left",
.
2768a
        "unit": "mm",
.
2766c
        "description": "Bottom",
.
2757a
        "unit": "mm",
.
2755c
        "description": "Top",
.
2744c
        "description": "No. vertical",
.
2733c
        "description": "No. horizontal",
.
2721c
        "description": "Type",
.
2709c
        "description": "Set to",
.
2700a
        "unit": "mm",
.
2698c
        "description": "Offset",
.
2689a
        "unit": "pt",
.
2687c
        "description": "Thickness",
.
2678a
        "unit": "percent",
.
2667a
        "unit": "percent",
.
2656a
        "unit": "percent",
.
2645a
        "unit": "percent",
.
2625a
        "unit": "percent",
.
2614a
        "unit": "percent",
.
2603a
        "unit": "percent",
.
2592a
        "unit": "percent",
.
2581a
        "unit": "mm",
.
2579c
        "description": "Bottom",
.
2570a
        "unit": "mm",
.
2568c
        "description": "Top",
.
2559a
        "unit": "mm",
.
2557c
        "description": "Right",
.
2548a
        "unit": "mm",
.
2546c
        "description": "Left",
.
2537a
        "unit": "pt",
.
2535c
        "description": "Thickness",
.
2517c
        "description": "Bottom",
.
2508c
        "description": "Top",
.
2499c
        "description": "Right",
.
2490c
        "description": "Left",
.
2481a
        "unit": "percent",
.
2470a
        "unit": "percent",
.
2459a
        "unit": "percent",
.
2448a
        "unit": "percent",
.
2437a
        "unit": "mm",
.
2435c
        "description": "Bottom",
.
2426a
        "unit": "mm",
.
2424c
        "description": "Top",
.
2413c
        "description": "Right",
.
2402c
        "description": "Left",
.
2391c
        "description": "Thickness",
.
2373c
        "description": "Bottom",
.
2364c
        "description": "Top",
.
2355c
        "description": "Right",
.
2346c
        "description": "Left",
.
2337a
        "unit": "mm",
.
2335c
        "description": "Bottom",
.
2326a
        "unit": "mm",
.
2324c
        "description": "Left",
.
2315a
        "unit": "mm",
.
2313c
        "description": "Right",
.
2304a
        "unit": "mm",
.
2302c
        "description": "Top",
.
2293a
        "unit": "mm",
.
2291c
        "description": "Bottom",
.
2282c
        "description": "Bottom",
.
2271c
        "description": "Top",
.
2262c
        "description": "Top",
.
2253a
        "unit": "mm",
.
2251c
        "description": "Right",
.
2242c
        "description": "Right",
.
2233a
        "unit": "mm",
.
2231c
        "description": "Left",
.
2221,2224c
        "key": "VAR_NAME_Tint_Value",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Reduce_Outer_Border",
        "description": "Reduce to outer border",
        "valueType": "BOOLEAN",
        "defaultValue": true,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "Structural",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "String",
        "defaultValue": "OutLine",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "InkFree",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting"
        ]
      }
    ]
  },
  {
    "id": 84,
    "automationKey": "BANNER_WITH_GROMMETS",
    "name": "Add Finishing",
    "comment": "Adds grommets, edgereinforcment and folding lines to a banner.",
    "description": "Resizes the Print Item to the final output size adding optional Grommets, Folding Lines and a Dieline",
    "variables": [
      {
        "key": "DO_FIXUP_SCALE",
        "description": "Scale",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_BLEED_MIRORRING",
        "description": "Add Bleed by mirroring",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_ADD_EDGE_REINFORCEMENT",
        "description": "Add Edge Reinforcement",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_CLIP_EXISTING_BLEED",
        "description": "Remove existing Bleed",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_ADD_FOLDING_LINE_TO_TRIMBOX",
        "description": "Add Folding Lines",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_ADD_WELDING_LINE_TO_TRIMBOX",
        "description": "Add Welding Lines",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_ADD_DIE",
        "description": "Add Dieline",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "DO_FIXUP_ADD_GROMMET",
        "description": "Add Grommets",
        "valueType": "BOOLEAN",
        "defaultValue": false,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Long_Edge",
        "description": "Long edge of the final format",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": 0,
        "max": 1000000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Short_Edge",
        "description": "Short edge of the final format",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": 0,
        "max": 1000000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Method",
        "description": "Bleed Method",
        "valueType": "STRING",
        "defaultValue": "PageContCorners",
        "displayVariable": true,
        "regex": false,
        "options": [
          "PageContCorners",
          "LastPixelCorners",
          "EdgeCorner"
        ]
      },
      {
        "key": "VAR_NAME_Bleed_Resolution",
        "description": "Resolution",
        "valueType": "DOUBLE",
        "defaultValue": 300,
        "unit": "dpi",
        "min": 0,
        "max": 10000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Expect_Spotcolor",
        "description": "Except Spotcolor",
        "valueType": "String",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Bleed_Box",
        "description": "Create Bleed on",
        "valueType": "String",
        "defaultValue": "TrimB",
        "displayVariable": true,
        "regex": false,
        "options": [
          "TrimB",
          "BleedB"
        ]
      },
      {
        "key": "VAR_NAME_Bleed_Left_Edge",
        "description": "Left",
        "valueType": "BOOLEAN",
        "defaultValue": true,
.
2216,2217c
          "midline",
          "outside",
          "inside"
.
2209,2212c
        "key": "VAR_NAME_Stroke_Position_Init",
        "description": "Contour Alignment",
        "valueType": "STRING",
        "defaultValue": "midline",
.
2205c
        "regex": false,
.
2201,2203c
        "key": "VAR_NAME_Stroke_Width",
        "description": "Line Width",
        "valueType": "DOUBLE",
        "defaultValue": 1,
        "unit": "pt",
        "min": 0,
        "max": 100,
.
2195c
        "max": 100,
.
2190,2193c
        "key": "VAR_NAME_Black_Init",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
.
2183,2187c
        "options": []
.
2177,2180c
        "key": "VAR_NAME_Yellow_Init",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
.
2171c
        "max": 100,
.
2169a
        "unit": "percent",
.
2166,2168c
        "key": "VAR_NAME_Magenta_Init",
        "description": "Magenta",
        "valueType": "INTEGER",
.
2160c
        "max": 100,
.
2158a
        "unit": "percent",
.
2155,2157c
        "key": "VAR_NAME_Spot_Color",
        "description": "Select Spot Color ",
        "valueType": "STRING",
        "defaultValue": "",
        "displayVariable": true,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Cyan_Init",
        "description": "Cyan",
        "valueType": "INTEGER",
.
2149,2151c
          "Vector",
          "Text",
          "VectorAndText"
.
2145c
        "defaultValue": "Vector",
.
2142,2143c
        "key": "VAR_NAME_Object",
        "description": "Apply to",
.
2137,2138c
          "CMYK",
          "Spot Color"
.
2133c
        "defaultValue": "CMYK",
.
2130,2131c
    "id": 99,
    "automationKey": "ADD_WHITE_OUTLINE_FOR_COLORED_OBJECTS",
    "name": "Add White Outline for Colored Areas",
    "comment": "Add White Outline for Colored Objects",
    "description": "Adds a white outline for selected color areas to reduce bleeding of colors.",
    "variables": [
      {
        "key": "VAR_NAME_Color",
        "description": "Color Mode",
.
2127a
      }
    ]
.
2121,2123c
        "key": "VAR_NAME_Reduce_to_outer_borders",
        "description": "Reduce shape to outer borders",
        "valueType": "Boolean",
.
2112,2115c
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "String",
        "defaultValue": "White",
.
2103,2107c
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
.
2094,2097c
        "key": "VAR_NAME_Spotcolor_opacity",
        "description": "Opacity",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
.
2085,2088c
        "key": "VAR_NAME_Spotcolor_tint",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
        "min": 0,
        "max": 100,
.
2076,2079c
        "key": "VAR_NAME_Find_spotcolorname",
        "description": "Spot Color Name",
        "valueType": "STRING",
        "defaultValue": "Dieline",
.
2067,2070c
        "key": "VAR_NAME_Spotcolorname_white",
        "description": "Spot Color Name for White",
        "valueType": "STRING",
        "defaultValue": "White",
.
2058,2061c
        "key": "VAR_NAME_Adjust_size",
        "description": "Adjust Size",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": -100,
        "max": 100,
.
2051,2055c
    "id": 83,
    "automationKey": "ADD_WHITE_FOR_SELECTED_SPOTCOLOR_OBJECTS",
    "name": "Add White to Objects using the selected Spot Color",
    "comment": "Adds White to object which uses the selected Spot Color.",
    "description": "Adds White to objects which use the selected Spot Color.",
.
2045c
          "Imprinting",
          "White"
.
2013c
        "defaultValue": "White",
.
2011c
        "description": "Type",
.
1996c
        "defaultValue": "White",
.
1994c
        "description": "Group",
.
1987c
        "defaultValue": false,
.
1984,1985c
        "key": "VAR_NAME_Do_Invert",
        "description": "Invert Spot Color",
.
1980c
        "regex": true,
.
1973,1978c
        "key": "VAR_NAME_Technical_Spotcolor",
        "description": "Not used in the UI",
        "valueType": "STRING",
.
1967,1969c
          "800",
          "1200",
          "3000"
.
1963c
        "defaultValue": "1200",
.
1960,1961c
        "key": "VAR_NAME_Accuracy_Mode",
        "description": "Accuracy",
.
1954a
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "STRING",
        "defaultValue": "White",
.
1949,1952c
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
.
1944c
        "displayVariable": false,
.
1941a
        "unit": "percent",
.
1938,1940c
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
.
1933c
        "displayVariable": false,
.
1930a
        "unit": "percent",
.
1927,1929c
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 20,
        "unit": "percent",
        "min": 0,
        "max": 100,
        "displayVariable": false,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
.
1916,1919c
        "key": "VAR_NAME_Spotcolor_opacity",
        "description": "Opacity",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
.
1905,1908c
        "key": "VAR_NAME_Spotcolor_tint",
        "description": "Tint Value",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "unit": "percent",
.
1901c
        "regex": false,
.
1899c
        "defaultValue": "White",
.
1896,1897c
        "key": "VAR_NAME_Spotcolorname_white",
        "description": "Spot Color",
.
1889,1893c
        "options": []
.
1883,1886c
        "key": "VAR_NAME_Adjust_size",
        "description": "Adjust Size",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": -100,
        "max": 100,
.
1878,1879c
          "including white areas",
          "excluding white areas"
.
1874c
        "defaultValue": "excluding white areas",
.
1871,1872c
        "key": "VAR_NAME_White_Areas",
        "description": "White Areas",
.
1864,1868c
    "id": 18,
    "automationKey": "ADD_WHITE_FOR_PRINTED_OBJECTS",
    "name": "Add Spot Color to Printed Objects",
    "comment": "Adds ´White´to printed objects with an offset.",
    "description": "Creates a separation using the selected Spot Color for all printed objects. Use this Fixup for example, to create a reduced white channel for printed pixels.",
.
1859c
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
.
1853,1856c
        "key": "VAR_NAME_PS_Typ",
        "description": "Typ",
        "valueType": "STRING",
        "defaultValue": "White",
.
1850c
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
.
1844,1846c
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
.
1833,1838c
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "String",
        "defaultValue": "White",
.
1822,1825c
        "key": "VAR_NAME_White_Offset",
        "description": "Offset",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
.
1800,1816c
        "key": "VAR_NAME_Exclude_White_Area",
        "description": "Protect transparent an white areas",
        "valueType": "BOOLEAN",
        "defaultValue": false,
.
1791,1794c
        "key": "VAR_NAME_Include_White_Area",
        "description": "Protect transparent areas",
        "valueType": "BOOLEAN",
        "defaultValue": false,
.
1784c
        "unit": "percent",
        "min": 0,
.
1758,1782c
        "key": "VAR_NAME_Additional_Color_Black",
        "description": "Black",
        "valueType": "INTEGER",
.
1749,1752c
        "key": "VAR_NAME_Additional_Color_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "unit": "percent",
        "min": 0,
        "max": 100,
.
1741c
        "defaultValue": 0,
        "unit": "percent",
.
1738,1739c
        "key": "VAR_NAME_Additional_Color_Magenta",
        "description": "Magenta",
.
1730c
        "defaultValue": 20,
        "unit": "percent",
.
1727,1728c
        "key": "VAR_NAME_Additional_Color_Cyan",
        "description": "Cyan",
.
1721d
1718,1719c
        "key": "VAR_NAME_Setting_TT",
        "description": ": Pixels with a Total Ink Coverage of 0% results in a hue value of 100% using the selected Spot Color. Values above 300% Total Ink Coverage result in a hue value of 100% using the selected Spot Color. Intermediate values are generated linearly, decreasing in the Spot Color channel. \n\t\t\t\t: Pixels between 0% and 50% Total Ink Coverage results in a hue value of 100% using the selected Spot Color. Pixels between 50% and 200% Total Ink Coverage results in a linearly decreasing hue value from 100% to 0% using the selected Spot Color. Pixels above 200% Total Ink Coverage result in a hue value of 0% using the selected Spot Color.\n\t\t\t\t",
.
1712,1714c
          "White not Linear",
          "White Linear"
.
1708c
        "defaultValue": "White not Linear",
.
1705,1706c
        "key": "VAR_NAME_Setting",
        "description": "Ink Coverage Reduction",
.
1702c
        "options": [
          "72",
          "150",
          "300",
          "600"
        ]
.
1694,1699c
        "key": "VAR_NAME_Render_Resolution",
        "description": "Render Resolution",
        "valueType": "STRING",
        "defaultValue": "300",
        "unit": "dpi",
.
1688,1691c
        "options": []
.
1685c
        "defaultValue": "White",
.
1682,1683c
        "key": "VAR_NAME_Spotcolorname",
        "description": "Spot Color",
.
1675,1679c
    "id": 1,
    "automationKey": "ADD_SPOT_BY_INK_COVERAGE",
    "name": "Create Spot Color separation depending on Total Ink Coverage",
    "comment": "Add Spotcolor depending on total Ink coverage",
    "description": "Creates a separation using the selected Spot Color based on the current page content, depending on the total ink coverage. The higher the total ink coverage, the lower the percentage of ink coverage contained in the separation.\n\tUse this Fixup for example, to create a white channel or any other System-wide Defined Spot Color, dependent on the Total Ink Coverage in order to reduce ink costs or to reduce the ink coverage.",
.
1635c
        "description": "Type",
.
1618c
        "description": "Group",
.
1609c
        "description": "New Spot Color Name",
.
1600c
        "description": "Rename Dieline",
.
1598a
        "key": "VAR_NAME_Overprint_stroke",
        "description": "Overprint State",
        "valueType": "STRING",
        "defaultValue": "On",
        "displayVariable": true,
        "regex": false,
        "options": [
          "On",
          "Off"
        ]
      },
      {
.
1591c
        "description": "Layer Name",
.
1582a
        "unit": "percent",
.
1580c
        "description": "Black",
.
1571a
        "unit": "percent",
.
1569c
        "description": "Yellow",
.
1560a
        "unit": "percent",
.
1549a
        "unit": "percent",
.
1542c
        "regex": false,
.
1538c
        "description": " Spot Color Name",
.
1529a
        "unit": "pt",
.
1527c
        "description": "Line Width (pt)",
.
1518a
        "unit": "mm",
.
1516c
        "description": "Offset",
.
1507c
        "description": "Dieline",
.
1497,1505d
1494c
    "description": "Adds an additional overprinted Dieline to an existing Dieline in the defined Offset.",
.
1492c
    "name": "Add a Second Dieline",
.
1490c
    "id": 100,
.
1480c
        "description": "Create Marks on Layer",
.
1471a
        "unit": "mm",
.
1469c
        "description": "Offset",
.
1455,1467d
1447a
        "unit": "mm",
.
1445c
        "description": "Length",
.
1436a
        "unit": "pt",
.
1434c
        "description": "Weight",
.
1425c
        "description": "Bleed Marks",
.
1416c
        "description": "Crop Marks",
.
1412c
    "description": "Adds Crop Marks and/or Bleed marks. Crop Marks are set to the TrimBox and Bleed Marks are set to the BleedBox.",
.
1410c
    "name": "Add Crop Marks",
.
1394,1408c
    "id": 17,
.
1391a
      }
    ]
.
1386a
        "unit": "mm",
.
1384c
        "description": "Bottom",
.
1375a
        "unit": "mm",
.
1373c
        "description": "Top",
.
1371a
        "key": "VAR_NAME_Additional_Overlap",
        "description": "Additional Overlap",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
.
1364a
        "unit": "mm",
.
1362c
        "description": "Bottom",
.
1353a
        "unit": "mm",
.
1351c
        "description": "Top",
.
1349a
        "key": "VAR_NAME_Hem",
        "description": "Hem",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
.
1347c
    "description": "Adds a hem at the top or bottom edge of the design to the front. The Print Item on the back is mirrored to the Print Item on the front. You can define which area of the backside should overlap on the front side up to the maximum size of the hem.",
.
1345c
    "name": "Add Pole Pockets",
.
1343c
    "id": 102,
.
1333c
        "defaultValue": 12,
        "unit": "pt",
.
1330,1331c
        "key": "VAR_NAME_Create_Outline",
        "description": "Create Outline",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Textsize",
        "description": "Text smaller than",
.
1322a
        "unit": "percent",
.
1319,1320c
        "key": "VAR_NAME_Black",
        "description": "Black",
.
1311a
        "unit": "percent",
.
1308,1309c
        "key": "VAR_NAME_Yellow",
        "description": "Yellow",
.
1300a
        "unit": "percent",
.
1297,1298c
        "key": "VAR_NAME_Magenta",
        "description": "Magenta",
.
1291c
        "max": 100,
.
1289c
        "defaultValue": 0,
        "unit": "percent",
.
1286,1287c
        "key": "VAR_NAME_Cyan",
        "description": "Cyan",
.
1280,1283c
        "options": []
.
1277d
1274,1275c
        "key": "VAR_NAME_Text_Color",
        "description": "Text Color",
.
1266a
        "unit": "pt",
.
1264c
        "description": "Line Width",
.
1262a
        "key": "VAR_NAME_Objecttype",
        "description": "Apply to",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
.
1260c
    "description": "Creates an outline for text in the entered outline thickness. The outline color corresponds to the text color. Note that the line width entered is centered and therefore the text will increase by half of the line width.",
.
1258c
    "name": "Add Outline to Text",
.
1256c
    "id": 16,
.
1240,1251d
1234a
        "unit": "percent",
.
1232c
        "description": "Black",
.
1223a
        "unit": "percent",
.
1221c
        "description": "Yellow",
.
1212a
        "unit": "percent",
.
1201a
        "unit": "percent",
.
1190a
        "unit": "mm",
.
1187,1188c
        "key": "VAR_NAME_Line_Offset_Bottom_init",
        "description": "Bottom",
.
1179a
        "unit": "mm",
.
1176,1177c
        "key": "VAR_NAME_Line_Offset_Top_init",
        "description": "Top",
.
1168a
        "unit": "mm",
.
1165,1166c
        "key": "VAR_NAME_Line_Offset_Right_init",
        "description": "Right",
.
1157a
        "unit": "mm",
.
1154,1155c
        "key": "VAR_NAME_Line_Offset_Left_init",
        "description": "Left",
.
1146a
        "unit": "pt",
.
1144c
        "description": "Line Width",
.
1135c
        "description": "Spot Color Name",
.
1126c
        "description": "Bottom",
.
1117c
        "description": "Top",
.
1108c
        "description": "Right",
.
1099c
        "description": "Left",
.
1097a
        "key": "VAR_NAME_Origin_Label",
        "description": "Origin",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Offset_Label",
        "description": "Offset",
        "valueType": "STRING",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Box",
        "description": "Create Line on",
        "valueType": "STRING",
        "defaultValue": "ImageBox",
        "displayVariable": true,
        "regex": false,
        "options": [
          "ImageBox",
          "ImageBox + Bleed"
        ]
      },
      {
.
1095c
    "description": "Adds a printed line to the ImageBox using the selected edge)s. The line is created as a Spot Color. Line thickness and the offset from the ImageBox can also be selected.",
.
1093c
    "name": "Create Line on Box",
.
1091c
    "id": 4,
    "automationKey": "ADD_INK_FREE_ZONE",
    "name": "Create Unprinted Rectangle",
    "comment": "Creates an ink free zone.",
    "description": "Creates an unprinted (rectangle) based on the entered starting point, width and height. By default, the starting point (0/0) for the rectangle is at the lower left corner of the TrimBox.",
    "variables": [
      {
        "key": "VAR_NAME_Find_Spotcolorname",
        "description": "Spotcolorname",
        "valueType": "STRING",
        "defaultValue": "Dieline",
        "displayVariable": false,
        "regex": true,
        "options": []
      },
      {
        "key": "VAR_NAME_Offset_X",
        "description": "X-Origin",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": 0,
        "max": 10000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Offset_Y",
        "description": "Y-Origin",
        "valueType": "DOUBLE",
        "defaultValue": 0,
        "unit": "mm",
        "min": 0,
        "max": 10000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Width",
        "description": "Width",
        "valueType": "DOUBLE",
        "defaultValue": 100,
        "unit": "mm",
        "min": 0,
        "max": 100000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Height",
        "description": "Height",
        "valueType": "DOUBLE",
        "defaultValue": 100,
        "unit": "mm",
        "min": 0,
        "max": 100000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Layername",
        "description": "Layer Name",
        "valueType": "STRING",
        "defaultValue": "Structural",
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_PS_Group",
        "description": "Group",
        "valueType": "STRING",
        "defaultValue": "Structural",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Structural",
          "Dimensions",
          "Braille",
          "Legend",
          "Positions",
          "White",
          "Varnish"
        ]
      },
      {
        "key": "VAR_NAME_PS_Typ",
        "description": "Type",
        "valueType": "STRING",
        "defaultValue": "InkFree",
        "displayVariable": true,
        "regex": false,
        "options": [
          "Cutting",
          "PartialCutting",
          "ReversePartialCutting",
          "Creasing",
          "ReverseCreasing",
          "CuttingCreasing",
          "ReverseCuttingCreasing",
          "PartialCuttingCreasing",
          "ReversePartialCuttingCreasing",
          "Drilling",
          "Gluing",
          "FoilStamping",
          "ColdFoilStamping",
          "Embossing",
          "Debossing",
          "Perforating",
          "Bleed",
          "VarnishFree",
          "InkFree",
          "InkVarnishFree",
          "Folding",
          "Punching",
          "Stapling",
          "Hologram",
          "Barcode",
          "ContentArea",
          "CodingMarking",
          "CodingMarking",
          "Imprinting",
          "White"
        ]
      }
    ]
  },
  {
    "id": 90,
.
1080,1084c
        "key": "VAR_NAME_Spacing_Grommet_Top_Init",
        "description": "Top",
        "valueType": "DOUBLE",
        "defaultValue": 500,
        "unit": "mm",
        "min": 1,
        "max": 1000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Spacing_Grommet_Bottom_Init",
        "description": "Bottom",
        "valueType": "DOUBLE",
        "defaultValue": 500,
        "unit": "mm",
        "min": 1,
        "max": 1000,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Grommet_Template",
        "description": "Grommet Template",
        "valueType": "STRING",
        "defaultValue": "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_1.pdf",
        "displayVariable": true,
        "regex": false,
        "options": [
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_1.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_5.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Grommet_1_10.pdf",
          "C:\\Program Files\\PPD\\ZuniComm\\images\\Drillhole.pdf"
        ]
      },
      {
        "key": "VAR_NAME_Spotcolor",
        "description": "Spot Color Name",
        "valueType": "STRING",
        "defaultValue": "CutContour",
        "displayVariable": true,
.
1072c
        "defaultValue": 500,
        "unit": "mm",
.
1069,1070c
        "key": "VAR_NAME_Spacing_Grommet_Right_Init",
        "description": "Right",
.
1061c
        "defaultValue": 500,
        "unit": "mm",
.
1058,1059c
        "key": "VAR_NAME_Spacing_Grommet_Left_Init",
        "description": "Left",
.
1050,1051c
        "defaultValue": 27.5,
        "unit": "mm",
        "min": 0,
.
1047,1048c
        "key": "VAR_NAME_Margin_Grommet_Right_Init",
        "description": "Right",
.
1039,1040c
        "defaultValue": 27.5,
        "unit": "mm",
        "min": 0,
.
1036,1037c
        "key": "VAR_NAME_Margin_Grommet_Left_Init",
        "description": "Left",
.
1028,1029c
        "defaultValue": 27.5,
        "unit": "mm",
        "min": 0,
.
1025,1026c
        "key": "VAR_NAME_Margin_Grommet_Bottom_Init",
        "description": "Bottom",
.
1017,1018c
        "defaultValue": 27.5,
        "unit": "mm",
        "min": 0,
.
1014,1015c
        "key": "VAR_NAME_Margin_Grommet_Top_Init",
        "description": "Top",
.
1006,1007c
        "defaultValue": 10,
        "min": 1,
.
1003,1004c
        "key": "VAR_NAME_Count_Grommet_Vertical",
        "description": "No. vertical",
.
995,997c
        "defaultValue": 10,
        "min": 1,
        "max": 1000,
.
992,993c
        "key": "VAR_NAME_Count_Grommet_Horizontal",
        "description": "No. horizontal",
.
981c
        "description": "Type",
.
967,979d
964c
    "description": "Adds Grommets horizontally and vertically. You can select either: add Grommets by Numbers or add Grommets by Distance.",
.
962c
    "name": "Add Grommets",
.
960c
    "id": 15,
.
950a
        "unit": "mm",
.
948c
        "description": "Bottom",
.
939a
        "unit": "mm",
.
937c
        "description": "Left",
.
928a
        "unit": "mm",
.
926c
        "description": "Right",
.
917a
        "unit": "mm",
.
915c
        "description": "Top",
.
902,913d
899c
    "description": "The Print Item can be enlarged by adding an additional unprinted area on each side. This is based on the TrimBox.",
.
897c
    "name": "Add Edge Reinforcement",
.
895c
    "id": 91,
.
855c
        "description": "Typ",
.
838c
        "description": "Group",
.
829a
        "unit": "percent",
.
827c
        "description": "Black",
.
818c
        "defaultValue": 100,
        "unit": "percent",
.
816c
        "description": "Yellow",
.
807c
        "defaultValue": 0,
        "unit": "percent",
.
796c
        "defaultValue": 100,
        "unit": "percent",
.
785c
        "description": "Spot Color Name",
.
776a
        "unit": "mm",
.
774c
        "description": "Offset",
.
765c
        "description": "Additional Dieline",
.
751,763d
743a
        "unit": "mm",
.
741c
        "description": "Corner Radius",
.
732c
        "description": "Layer Name",
.
717c
        "description": "Line Shape",
.
705c
        "description": "Overprint State",
.
696c
        "description": "Spot Color Name",
.
694a
        "key": "VAR_NAME_Cyan",
        "description": "Cyan",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Magenta",
        "description": "Magenta",
        "valueType": "INTEGER",
        "defaultValue": 100,
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Yellow",
        "description": "Yellow",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
        "key": "VAR_NAME_Black",
        "description": "Black",
        "valueType": "INTEGER",
        "defaultValue": 0,
        "min": 0,
        "max": 100,
        "displayVariable": true,
        "regex": false,
        "options": []
      },
      {
.
687a
        "unit": "pt",
.
685c
        "description": "Line Width",
.
676a
        "unit": "mm",
.
674c
        "description": "Offset",
.
672a
        "key": "VAR_NAME_Box",
        "description": "Create Dieline on",
        "valueType": "STRING",
        "defaultValue": "ImageBox",
        "displayVariable": true,
        "regex": false,
        "options": [
          "ImageBox",
          "ImageBox + Bleed"
        ]
      },
      {
.
670c
    "description": "Adds an overprinted DieLine and optionally a second overprinted Dieline in the defined Offset. The Dieline is assigned to the Processing Steps Group and Type according to ISO 19593-1.\n        ",
.
668c
    "name": "Add a DieLine to the ImageBox",
.
666c
    "id": 13,
.
626c
        "description": "Type",
.
609c
        "description": "Group",
.
600a
        "unit": "percent",
.
598c
        "description": "Black",
.
589a
        "unit": "percent",
.
587c
        "description": "Yellow",
.
578a
        "unit": "percent",
.
567a
        "unit": "percent",
.
556c
        "description": "Spot Color Name",
.
547a
        "unit": "mm",
.
545c
        "description": "Offset",
.
536c
        "description": "Additional Dieline",
.
528c
        "description": "Ignore Selected Spot Color",
.
521c
        "defaultValue": "Structural",
.
519c
        "description": "Layer Name",
.
504c
        "description": "Line Shape",
.
492c
        "description": "Overprint State",
.
485a
        "unit": "pt",
.
483c
        "description": "Line Width",
.
474c
        "description": "Spot Color Name",
.
460,472d
452c
        "description": "Reduce to outer border",
.
443a
        "unit": "mm",
.
441c
        "description": "Offset",
.
437c
    "description": "Adds a DieLine to irregular shapes and optionally a second overprinted Dieline in the defined Offset. The Dieline is assigned to the Processing Steps Group and Type according to ISO 19593-1..",
.
435c
    "name": "Add a DieLine to Irregular Shapes",
.
433c
    "id": 11,
.
393c
        "description": "Type",
.
376c
        "description": "Group",
.
367a
        "unit": "percent",
.
365c
        "description": "Black",
.
356a
        "unit": "percent",
.
354c
        "description": "Yellow",
.
345a
        "unit": "percent",
.
334a
        "unit": "percent",
.
323c
        "description": "Spot Color Name",
.
314a
        "unit": "mm",
.
312c
        "description": "Offset",
.
303c
        "description": "Additional Dieline",
.
301a
        "key": "VAR_NAME_Overprint_stroke",
        "description": "Overprint State",
        "valueType": "STRING",
        "defaultValue": "On",
        "displayVariable": true,
        "regex": false,
        "options": [
          "On",
          "Off"
        ]
      },
      {
.
296c
        "defaultValue": "Structural",
.
294c
        "description": "Layer Name",
.
285c
        "description": "Spot Color Name",
.
275c
        "defaultValue": 1,
.
273c
        "description": "Line Width",
.
259,271d
251a
        "unit": "mm",
.
249c
        "description": "Height",
.
240a
        "unit": "mm",
.
238c
        "description": "Width",
.
229a
        "unit": "mm",
.
227c
        "description": "Vertical",
.
218a
        "unit": "mm",
.
216c
        "description": "Horizontal",
.
212c
    "description": "Adds a DieLine using a specific width and height from the center of the Print Item.",
.
210c
    "name": "Add a DieLine from the Center",
.
208c
    "id": 14,
.
200c
        "defaultValue": "Colored Bleed",
.
198c
        "description": "Spot Color Name",
.
189c
        "description": "Create Spotcolor",
.
180a
        "unit": "percent",
.
178,179c
        "description": "Black",
        "valueType": "INTEGER",
.
169a
        "unit": "percent",
.
167,168c
        "description": "Yellow",
        "valueType": "INTEGER",
.
158a
        "unit": "percent",
.
157c
        "valueType": "INTEGER",
.
147a
        "unit": "percent",
.
146c
        "valueType": "INTEGER",
.
139,140c
          "remove",
          "keep"
.
132,135c
        "key": "VAR_NAME_Remove_Existing_Bleed",
        "description": "Remove Existing Bleed",
        "valueType": "String",
        "defaultValue": "remove",
.
124a
        "unit": "mm",
.
122c
        "description": "Bottom",
.
113a
        "unit": "mm",
.
111c
        "description": "Top",
.
102a
        "unit": "mm",
.
100c
        "description": "Right",
.
91a
        "unit": "mm",
.
89c
        "description": "Left",
.
76,87d
65c
        "description": "Create Bleed on",
.
61c
    "description": "Creates a colored Bleed to extend an existing background area.",
.
57c
    "id": 103,
.
44c
        "description": "Offset",
.
32c
        "description": "Required Bleed",
.
18,30d
11c
        "description": "Do not consider",
.
7c
    "description": "Bleed is created by repeating pixels around an irregular shape. The Bleed is generated as a 300 dpi CMYK image and created in the background. You can determine which pixel is used for the repetition by specifying the offset. \n        If Spot Colors are used in the design, a color shift in the output for the bleed cannot be excluded.",
.
5c
    "name": "Create Bleed on Irregular Shape",
.
3c
    "id": 10,
.